Tversity and windows 8

From the GUI just select an itema and then click the delete button. From the command line please use the command:. This is done automatically by the Media Server. You can control the frequency and time of day in which this full synchronization is carried out by the media server. Even huge libraries , items and more will be synchronized very quickly less than a minute if nothing changed. In addition to that you can use the Graphical User Interface or the command line interface to refresh the entire media library or a particular folder whenever you see fit.

You can even use the command line tool in conjunction with some task scheduling tool like the one that comes with Windows to schedule a synchronization task if you wish to achieve some advanced scenario say add or refresh a folder automatically after some other event occurs. The TVersity Media Server and Screen Server are configured by default to reject requests originating from outside your home network and therefore with this configuration any attempt to access your media from the Internet will be blocked if you wish to access your media remotely you will need to enable remote connections and set a username and password for such connections.

You should put your home network behind a hardware firewall or router with firewall capabilities. A firewall software running on your computer, while adding a level of protection, is not by itself sufficient. You should run a firewall software on every machine on the network or at least enable the firewall software that comes with Windows. When you enable the TVersity Media Server or Screen Server to act as a server you should take the time to create the most restrictive rule possible that still allows the servers and the target device to interact with one another.

For example a restricitve firewall rule would allow the media server to act as a server on the given port only for the specific IP address or the MAC address of your target device s. A less restrictive rule would be to allow it to act as a server on the given port for any IP address inside the home network. A non restrictive rule would be to allow it to act as a server on any port and for any source IP address - you should avoid such rules.

If you have a wireless network running you should allow only specific MAC addresses to join the network and you should turn on encryption on your network. Otherwse it becomes too easy for someone in close proximity to your home to gain access to your home network, in which case they will also gain access to anything shared via TVersity Media Server and Screen Server.

If you have no intention to use TVersity Media Server or Screen Server on the go, you should disable it from accepting requests originating from outside your home network this is the default setting. We are currently releasing to consumers Windows versions only.

We offer Windows, Mac and Linux versions to pay-TV operators that distribute a white-label version of TVersity Media Server but we do not make such releases available to consumers.

We do not allow comnsumers to install it on such devices, however the software can be embedded by the manufacturer. If you are manufacturing such a device and would like to learn more about using the TVersity Media Server, please email our sales department.

Locate the TVersity menu in the Windows start menu and select uninstall then follow the directions of the uninstall wizard. This will open a window listing all the programs on your system, locate the program you wish to uninstall and double click on it.

This will start the uninstall wizard of the selected application, follow the directions of the uninstall wizard. This is a known issue. Currently browsing the library during a refresh is likely to fail. Waiting till the refresh operation is done will solve this problem. If you would like the server to abort the current refresh operation, you need to restart it since currently the GUI does not have an abort refresh feature. For the TVersity Media Server you need to make sure the Windows service that corresponds to it, is started.

This should open a black window in which the progress of the starting operation will be displayed. If it starts successfully then you most likely have solved your problem. If it says that the server was already running please check the other possible solutions below. If starting the service seems to fail please refer to the next question in this FAQ which deals with problems in getting the media server to start as a service.

Make sure that the Windows Firewall and any other personal firewall installed on your computer does not block the server from accpeting incoming connections. This is a very common problem so please take the time to check this issue. You will need to make sure that the executable MediaServer. Some media players do not allow you to choose which media server to use and therefore you first need to terminate the media server you were using before and only then will the media player be able to identify the TVersity Media Server, please make sure no other media server software is running.

Make sure that no other program is listening on the relevant port for the Media Server and for the Screen Server. If the computer running the TVersity server has more than one active network interface, you need to make sure that the the TCP binding order on your machine is such that the network interface on which it is supposed to communicate with the media player typically your Local Area Connection appears first.

Note that both VPNs and virtualization software like VMWare add virtual netrwork intefaces and therefore in such a case you do have multiple network interfaces from Windows point of view. More information is available here and here. Make sure your router allows multicast traffic. Some routers block certain types of multicast traffic traffic over a wireles connection even when they are configured not to do so, therefore try using a wired connection at least for testing purposes and see if it helps.

Frequent disconnections in your home network could cause errors with some media players from which they cannot recover without a reboot. Try rebooting your media player or shutting it off and then turning it back on and see if the problem persists.

Try disabling it. If nothing else works, check the network equipment, a bad cable or faulty hardware is often the cause of this issue. Are you using uTorrent? Chromecast TVersity Media Server comes with an intuitive HTML5 interface for Chrome, which allows you to browse and search your media library and push content for playback on Chromecast.

The Pro edition will also transcode content that Chromecast does not support such as videos ripped from DVDs and Blu-ray discs. The Pro edition will also transcode content that Roku does not support such as videos ripped from DVDs and Blu-ray discs. The Pro edition will also transcode content that the mobile device does not support and stream it in a mobile friendly way i.

The Pro edition may be able to transcode content that the device does not support, however due to the large variety of brands and models this is not guaranteed. For me, the last 3 versions have been rock solid.

Review by oldcomputerwiz on Oct 28, Version: 0. It may be disabled when installing or after installation. Free Trial version available for download and testing with usually a time limit or limited functions.

No installation is required. It works on bit and bit Windows. It works only on bit Windows. It works on bit and bit Mac OS. It works only on bit Mac OS. Be careful when you install the software and disable addons that you don't want! It may not contain the latest versions. Our hosted tools are virus and malware scanned with several antivirus programs using www. Rating Rating from Latest tool updates.

Furthermore, it connects automatically to the Internet to show the most interesting and recent broadcasts. As a complement, there is a paid version of TVersity that increases its functions and capacity. Download TVersity for free Vote 1 2 3 4 5 6 7 8 9 Antony Peel.

Software languages.